OBSBOT Tail Air
Working State: 69.65*73.25*132.5mm
Off State: 69.65*73.25*135.5mm
Weight: 344.5g
Integrated AI chip, Trillions of calculations per second
Image sensor: 1/1.8'' CMOS
Macro pixel size: 2.0μm*2.0μm
Effective pixels: 8.4 million
Effective pixel resolution: 3856x2176
Lens system: 8 Optical Lenses
Zoom range: 4X digital zoom
ISO range: 100-6400
Exposure value: ±3EV
Electronic shutter speed: 1/8000 s to the limit of frames per second
Focus: Auto Focus/Manual Focus
Aperture: ƒ/1.8
Equivalent focal length: 23mm
White balance: 2000K-10000K
Gyroscope: 6-axis Gyroscope
Photo resolution: 4K, 1080P
Video resolution: 4K@30/25/24 fps, 1080@60/50/48/30/25/24 fps
Max video storage bit rate: H264: 100Mbps, H265: 80Mbps
Video format: MJPEG, H264, H265
Gimbal installation: Non-removable
Controllable range: Pan: ±150°; Tilt: -65°~32°
Mechanical range: Pan: ±160°; Tilt: ±90°
Max controllable speed: 120°/s
Angle jitter: ±0.02°
Audio input: Built-in Two MEMS Microphones
Built-in 3.5mm TRS Connector (AUX)
Support MIC IN/LINE IN
Audio modes: Noise Reduction/Stereo Sound
Audio format: AAC/PCM
Operating frequency: 2.4 G/5.8 GHz
Signal transmission range: 2.4G 140m, 5.8G 80m
Transmission power: 2.4 GHz: <18 dBm（FCC/CE/SRRC/MIC）
5.1 GHz: <15 dBm（FCC/CE/SRRC/MIC）
5.8 GHz: <15 dBm（FCC/CE/SRRC）
Bluetooth protocol: BLE 5.0
Bluetooth operation frequency range: 2.400 GHz to 2.4835 GHz
USB: 2.0
Input: 5V/2A
Quick charge protocol: Don't Support
Charging time: 90 Minutes (Power off status)
Operating time: 154 minutes
*Tested in a laboratory environment while recording 1080p/30fps video and should be used for reference only
Battery type: Lithium Polymer(Li-po)
Battery capacity: 1500mAh
Battery energy: 11.4Wh
Battery voltage: 7.6V
Functions
Gesture Control
Memory card type: Micro SD Card (up to 512GB) -exFAT (Recommended)/FAT32; U3 card (minimum write speed 30MB/S) recommended.
environment
Camera working environment temperature: -10°C-40°C
Battery charging ambient temperature: -10°C-40°C
Battery operating ambient temperature: -10°C-40°C
⚠ Charging will stop when the battery temperature exceeds 45°C.
For example, when connected to an external power supply, if the battery temperature exceeds 45°C, the camera will stop charging and will be powered directly from the external power supply.
